Pool Cage Repair in Tampa Bay, FL
A pool cage takes a beating in Tampa Bay — blazing UV, summer storms, salt air, and humidity that never quits. When screens tear, doors stop latching, or the frame starts chalking, Tampa Pool Cage Repair fixes it right. We handle everything from a single torn panel to full enclosure restoration, and every job starts with a free written quote.
What a Pool Cage Is — and What Goes Wrong With It in Florida
A pool cage is an aluminum-framed screen enclosure built over and around a pool, patio, or lanai. The frame is structural aluminum tubing, joined at corner posts and roof beams, with fiberglass or polyester screen spline-rolled into each panel opening. Doors are fitted with closers, latches, and often pet-resistant lower panels. It keeps bugs out, leaves out, and gives you a shaded, ventilated outdoor room you can use most of the year.
In Florida, though, the environment is working against that enclosure every single day. Here's what we see most often on Tampa Bay jobs:
UV degradation and brittle screen
Standard fiberglass screen has a realistic lifespan of 10 to 15 years in the Tampa Bay sun. South- and west-facing walls get the worst of it — the screen dries out, turns brittle, and starts splitting along the spline channel or tearing at the slightest bump from a pool toy or a branch. If your screens are over a decade old and popping in multiple panels, patching them is throwing money at a failing system.
Storm and wind damage
Tropical storms and hurricanes are a fact of life here. Wind-borne debris punches holes through panels, pressure differentials bow screens until they blow out of the spline channel, and sustained uplift bends roof beams and pulls anchors. After every named storm, storm damage repairs are the bulk of our schedule — see our storm damage repair page for how we handle that.
Rust and corrosion on fasteners
The aluminum frame itself doesn't rust, but the screws, taps, and spline-channel hardware do — especially in homes near the water in Clearwater, St. Petersburg, and along Tampa Bay. Rusted fasteners loosen, panels rattle in the wind, and corroded screws snap off during any repair, which is why we replace fasteners with stainless or coated hardware on every job we touch.
Door problems
Pool cage doors are the hardest-working part of the enclosure. Closers wear out, hinges sag, latches stop catching, and the kick plate screen at the bottom gets shredded by dogs and kids. A door that won't latch is a pool-safety issue, not just an annoyance — we fix doors fast.
Spline failure
The rubber spline that holds screen in the channel dries out, shrinks, and pops loose — usually starting on the sunniest walls. Once spline starts failing, screens balloon in the wind and tear at the edges. A rescreen with fresh spline solves it completely.
Oxidation and chalking
Years of sun and salt leave aluminum frames chalky, faded, and streaked. It's cosmetic at first, but chalking is the paint system failing — and bare, oxidized aluminum is harder to keep clean and eventually pits. Our painting and restoration service brings the frame back and adds years to its life.
Repair vs. Rescreen vs. Rebuild: Which One Do You Need?
Homeowners ask us this on almost every quote. Here's the straight answer:
Targeted repair — when the cage is otherwise healthy
Choose repair when the frame is straight, the screen is under about 8 years old, and damage is isolated: a few torn panels from a fallen branch, one bad door, a run of popped spline. Typical targeted repairs run a few hundred dollars, and we knock most of them out in a single visit.
Full rescreen — when the screen is failing everywhere
If screens are 10+ years old and tearing in multiple panels, rescreening the whole enclosure is cheaper per panel than repeated patch visits — and you get uniform new screen with fresh spline throughout. A typical full rescreen on an average Tampa pool cage runs $1,500 to $3,000, depending on enclosure size, mesh type, and how many door rebuilds are included. Most full rescreens take one to two days. Full details on our screen replacement page.
Restoration — frame is solid, finish is shot
When the aluminum is chalking or fading but structurally sound, a restoration bundles pressure washing, prep, professional-grade aluminum coating, a full rescreen, and new stainless fasteners. It looks like a new cage at a fraction of rebuild cost. See cage painting & restoration.
Rebuild — when the structure is compromised
Bent beams, failed anchors, collapsed roof sections, or a frame that's been patched too many times: that's rebuild territory. Full enclosure rebuilds in Tampa Bay typically run $8,000 to $20,000+ depending on size, roof style, and engineering requirements. We'll tell you honestly when repair stops making sense — we'd rather lose a small job than sell you repairs on a cage that needs to come down.
Our Process: Inspection to Cleanup
- Free inspection. We walk the full enclosure — every wall, the roof, every door — checking screen condition, spline, fasteners, frame alignment, anchors, and door hardware. We count and measure panels so the quote is based on your actual cage, not a guess.
- Written quote. You get an itemized quote on the spot or within 24 hours: what's being repaired or replaced, what screen type, how many panels, timeline. Good for 30 days. No pressure tactics.
- Repair day. We show up with the screen, spline, and hardware for your job. We protect the pool deck, cut screens to fit, roll new spline, replace rusted fasteners, rebuild doors, and straighten or replace bent members as quoted.
- Walkthrough and cleanup. We walk the finished work with you, test every door, and haul away all old screen, spline, and hardware. Your pool area is left clean — not littered with screen scraps.
Our Pool Cage Services
Every service below is performed by our own crew across Tampa Bay. Click through for full details, pricing guidance, and FAQs.
Screen Replacement & Rescreening
Full and partial rescreens with 18x14 standard, 20x20 no-see-um, pet-resistant, and solar mesh — fresh spline and stainless fasteners on every panel. Learn more about screen replacement →
Cage Painting & Restoration
Pressure wash, prep, and professional aluminum coatings that stop chalking and oxidation — plus restoration bundles that pair paint with a full rescreen. Learn more about painting & restoration →
Storm & Hurricane Damage Repair
Emergency temporary screen tack-ups, bent beam repair, anchor fixes, and full post-storm restoration — with photo documentation tips for insurance. Learn more about storm damage repair →
Lanai Screen Enclosure Repair
Repairs to lanai roof panels, kick plates, and doors, plus new lanai enclosure builds for patios — mansard, gable, and flat pan roof styles. Learn more about lanai enclosures →
Why Hire a Pool Cage Specialist
A pool cage looks simple until you're 14 feet up trying to roll spline into a channel without stretching the screen. General handymen and pressure-washing outfits offer "screen repair" on the side, but this work has specifics that matter: proper screen tension so panels don't sag or drum in the wind, the right spline diameter for your channel (too small and it pops; too big and it cuts the screen), stainless fasteners near salt air, and door geometry that actually latches. We do pool cages and screen enclosures all day, every day, across Tampa Bay. That focus is the difference between a repair that lasts 12 years and one that fails in two summers.
Service Areas
We repair pool cages throughout Tampa Bay, Florida:
- Tampa — pool cage repair across Tampa, from South Tampa to New Tampa
- Clearwater — including beach-area homes dealing with salt-air corrosion
- St. Petersburg — screen enclosure repair across the Pinellas peninsula
- Brandon — pool cage rescreens and storm repairs east of Tampa
- Riverview — serving the fast-growing South Shore communities
Just outside these areas? Call (813) 435-6556 — if we can get to you, we will.
Get a Free Quote on Your Pool Cage Repair
Send us a few photos of the damage or describe what you're seeing — we'll schedule a free inspection and leave you a written quote. Most repairs are completed within a week of approval.
Frequently Asked Questions
Small repairs — a single torn panel, a sticky door, a replaced spline run — typically run a few hundred dollars. A full rescreen of an average Tampa pool cage usually falls between $1,500 and $3,000. Full enclosure rebuilds start around $8,000 and can exceed $20,000 for large or custom cages. Every job gets a free written quote before we start.
If your screens are over 10 years old and failing in multiple panels, a full rescreen is almost always cheaper per panel than chasing individual repairs. If the frame is straight and the screen is under about 8 years old, targeted repairs make sense. If the aluminum is chalking, fasteners are rusted, or beams are bent from storm damage, ask us about a restoration or rebuild evaluation.
Standard fiberglass screen typically lasts 10 to 15 years in the Tampa Bay area. South- and west-facing walls fail first because of direct UV exposure. Screens near salt water — along the Clearwater and St. Petersburg coasts — can age faster due to salt corrosion on fasteners and spline.
Yes. Storm damage is a major part of our work: torn panels from wind-borne debris, bent or pulled beams from uplift, and failed anchors. After a named storm, we offer temporary screen tack-ups to keep bugs and debris out while you schedule the full repair.
We serve Tampa, Clearwater, St. Petersburg, Brandon, and Riverview — and surrounding Tampa Bay neighborhoods. If you're just outside that footprint, call (813) 435-6556 and we'll tell you straight whether we can make it work.
Yes. We inspect the cage in person, measure and count the panels, check the frame and fasteners, and leave you a written quote. No pressure, no obligation — the quote is good for 30 days.