How Much Does Pool Cage Screen Repair Cost in Tampa? (2026 Guide)
If your pool cage screen is torn, sagging, or falling apart, the first question is always the same: what is this going to cost? Here are the real price ranges we see across Tampa Bay in 2026, what drives the number up or down, and how to get a quote you can trust.
Quick Answer: Typical Tampa Pool Cage Repair Prices
No two cages are identical, but after years of working on enclosures across Tampa, Clearwater, St. Petersburg, Brandon, and Riverview, the pricing falls into reliable bands:
- Single panel replacement: $150–$350. One torn or blown-out panel, new mesh and spline, minor frame straightening included. If the surrounding frame is bent or the fasteners are corroded, expect the higher end.
- Partial rescreen (a handful of panels): $400–$900. Common when one wall took wind damage or the dog worked over the same two panels for a year.
- Full rescreen (average-size cage): $1,500–$3,000. Every panel pulled and replaced with new screen, new spline, and a fastener check. This is the most common job we do, and the per-panel price is better than piecemeal repairs.
- Door repair or replacement: $300–$650. Hinges, latches, bent frames, and re-screened door panels. A full new screen door costs more than repairing the old one, but a door that will not latch is both a bug highway and a pool-safety problem.
- Structural repairs: $500–$2,500+. Bent beams, corroded anchors, cracked concrete feet, and fastener replacement across the frame. Salt air near the coast eats fasteners fast — we see this constantly in Clearwater and St. Pete.
- Full cage rebuild: $8,000–$20,000+. When the frame itself is too far gone — widespread corrosion, hurricane-twisted beams, failed anchors — it is more honest and more economical to rebuild than to rescreen a dying structure.
These are Tampa Bay market ranges for professional work, not national averages. A quote far below them should make you ask hard questions (more on that below). Learn more about our screen replacement service or full pool cage repair options.
What Drives the Cost Up or Down
1. Cage size and panel count
The biggest single variable. A small lanai enclosure with 20 panels rescreens for far less than a large pool cage with 60+ panels and a tall roofline. Most contractors price by the panel plus a base setup fee, so bigger cages cost more almost linearly.
2. Mesh type: 18x14 vs. 20x20 vs. specialty screen
Standard 18x14 fiberglass mesh (Phifer or equivalent) is the workhorse of Tampa pool cages and the most economical option. 20x20 no-see-um mesh costs more per roll but keeps out tiny biting insects that slip through standard mesh — worth it if you live near water or preserves. Specialty screens — pet-resistant, solar, and privacy screens — cost the most but solve specific problems: claws, heat, and nosy neighbors. The mesh you choose can move a full rescreen by several hundred dollars.
3. Frame condition
Screen does not attach to air. If the aluminum frame is oxidized, the fasteners are rusted, or the spline track is bent, the crew has to remediate that before new screen goes in. Near salt air, we often replace fasteners with stainless hardware as part of the job — it adds cost now and prevents a much bigger repair later.
4. Height and access
Roof panels, high peaks, and cages over two-story homes need ladders, scaffolding, or lift time. A tall mansard roof panel costs more to replace than a waist-high wall panel for simple, physical reasons.
5. Doors and extras
Screen doors with new hardware, pet doors cut into panels, kick plates, and decorative features are priced separately. A cage with three doors costs more to rescreen than an identical cage with one.
How to Get an Accurate Quote
A reliable quote starts with a real inspection, not a phone estimate. Here is what to expect from a reputable contractor:
- An on-site look at the whole cage, including the roof, anchors, fasteners, and doors — not just the torn panel you called about.
- A written breakdown of labor, materials, mesh type, and any structural work, so you can compare quotes apples to apples.
- A straight answer on rescreen vs. rebuild. If your frame is failing, an honest contractor tells you a rescreen would be throwing money away.
- A timeline. Most rescreens take one to three days depending on size. Structural work adds time.
We offer free inspections across Tampa Bay and put every quote in writing before any work starts. Request your free quote here or call (813) 435-6556.
Red Flags in Cheap Quotes
Pool cage work attracts bargain pricing because the damage is visible and homeowners want it fixed fast. Watch for:
- Verbal-only quotes. If it is not written down, it is not a quote. Written quotes protect both sides.
- No mention of mesh type or brand. Unbranded or ultra-thin screen costs a fraction of quality Phifer mesh — and lasts a fraction of the time under Florida UV.
- Skipping the frame. A quote that rescreens over corroded fasteners and oxidized frames without prep is setting you up for panels blowing out next storm season.
- "We can start today, cash only." Legitimate crews are usually booked out at least a few days. Cash-only, no-paperwork pressure is a pattern, not a coincidence.
- No workmanship warranty language. Ask what happens if a panel blows out a month after the job. Vague answers are answers.
The cheapest quote is the one you only pay once. A rescreen done right in Tampa Bay should hold for 10–15 years — a rescreen done wrong gets redone in three.
Frequently Asked Questions
Most full rescreens on a standard Tampa pool cage run $1,500–$3,000. The final number depends on the cage's size (panel count), the mesh you choose (standard 18x14 vs. pet-resistant or solar screen), and the condition of the frame, fasteners, and doors.
A single panel replacement in Tampa Bay typically costs $150–$350, depending on panel size, mesh type, and whether the frame around it needs any repair before the new screen can go in.
A full rescreen usually wins on price per panel because the crew is already on-site with tools set up and scaffolding in place. Replacing a few panels makes sense if the rest of your screen is still in good shape — but if the screen is 12+ years old, patching one panel after another adds up fast and never looks uniform.
Most do, and you should insist on a written quote that breaks out labor, materials, and mesh type. Be cautious of verbal-only quotes or prices that seem far below the ranges above — they often skip frame prep, cheap spline, or thin screen that won't last.